$59.99 - $39.99
(as of Aug 06,2020 17:53:15 UTC – Details)
Is this MC650 microphone compatible with my camera?
Does your camera or camcorder have external 3.5mm microphone input?
Please check if your camera or camcorder has 3.5mm external microphone socket before the purchase. As some camera (such as Canon EOS Rebel T6) has a 2.5mm jack, you need to check what size input is provided.
MC650 microphone is ONLY compatible with 3.5mm standard stereo jack.
Does your camera have industry standard-sized shoe mount?
If you intend on mounting the microphone on camera. Please check your camera or camcorders feature an industry standard-sized shoe mount.
Pixel Technology Co., Ltd specializes in manufacturing and selling a variety of photographic accessories, ranging from filters to shutters, ring lights to speedlights, and much more.
In the Box:
1 x MC650 Condenser Microphone
1 x Deadcat Furry Windscreen
1 x Foam Windshield
1 x 9.8’ Extension Cable
MC650 On-Camera Microphone Kit
Then MC650 shotgun microphone works with DSLR cameras, capturing detailed, high-definition audio indoor and outdoor.
Note: This microphone is compatible with camera which has a standard hot shoe and 3.5mm jack socket. Not compatible with Canon EOS Rebel T6.
Not compatible with smartphone.
Active Electronics: FET impedance converter with bipolar output buffer
Frequency Range: 100Hz – 20KHz
Maximum SPL: 110dB
Signal to Noise Ratio: 74dB SPL
Sensitivity: -42dB (6.2mV/Pa)
High Pass Filter: 80Hz
Dimensions: 205*65*36 mm
Weight: 100g (without batteries)
Ensures recording is focusing on the audio in front of the camera and minimizing any surrounding sounds.
Integrated shock mount and foam windscreen to minimize unwanted noise.
Provides a +10 dB boost, 0 dB unity gain, or a -10 dB pad.
Selectably eliminates room ambiance and noise below 80 Hz, which will reduce wind noise and other low-frequency noise not blocked by the windscreen.
-10dB, 0dB, +10dB
2 x 1.5V AA Batteries, 100 Hours use
1 x dead cat furry windscreen, 1 x foam windshield, 1 x 9.8’ extension cable
1 x portable case 1 x 3m extension cable 1 x fluff windproof cover 1 x TRS cable 1 x TRRS cable
Indoor/Outdoor Use: The included deadcat furry windjammer minimize wind noise when recording in high wind condition outdoor, while the foam windscreen blocks gentle noise in indoor/studio environment
Features Super-Cardioid Polar Pattern: Ensures your recording is focusing on the audio in front of the camera and attenuating sounds from the sides, the result is a signal that sounds closer to the camera even in noisy environments or at moderate distances
High-Pass Filter Switch: A high-pass filter switch eliminates room ambiance and noise below 80 Hz, which will reduce wind noise and other low-frequency noise not blocked by the windscreen. equipped with 9.8″ extension cable for better and convenient use
Three-level Gain: Provides a +10 dB boost, 0 dB unity gain, or a -10 dB pad. The -10 dB pad protects against distortion when recording in loud environments, while the +10 dB boost can be used to achieve a higher gain signal. All the products in Pixel includes 45 days hassle-free full money back or replacement, please feel free to contact us if you have any problems, buy with confidence.